specification control drawing tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: crimp splicer, stub, nickel plated unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no.: d-609-12/-13/-14 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 31-jan.-01 doc issue: 1 drawn by: m. foronda cage code: 06090 replaces: n/a dcr number: d010061 prod. rev.: see table scale: none size: a sheet: 1 of 1 if this document is printed it becomes uncont rolled. check for the latest revision. ? 2004 tyco electronics corporation. all rights reserved product rev cma range* max weight color product name min max i.d. o.d. lbs./mpc code d-609-12 a 300 1510 1.27 (0.050) 1.13 (0.045) 2.03 (0.080) 1.90 (0.075) .30 red d-609-13 a 779 2680 1.75 (0.069) 1.62 (0.064) 2.69 (0.106) 2.56 (0.101) .49 blue d-609-14 a 1900 6755 2.59 (0.102) 2.46 (0.097) 3.89 (0.153) 3.73 (0.147) .99 yellow * not all wire combinations falli ng within the usable cma range can be accommodated within the splicer barrel. material 1. crimp splicer: base metal - copper alloy 101 or 102 per astm b 75. plating: du ctile nickel per qq-n-290. application 1. parts shall be of seamless tubular construction. 2. diameters shall be concentric within 0.127 (0.005) t.i.r. 3. packing and packaging shall be in accordan ce with section 5, level c, of mil-s-81824.
|
